Saturday, February 13, 2010
9:25 AM
Veneered Maple Desk In this picture, we are looking at one of the legs of the table. Once the glue on the Maple end caps had dried, we used a flush trim bit and our router to trim away the excess Maple overhang. It was then time to spray on two coats of lacquer to [...]
Friday, February 12, 2010
8:50 AM
Veneered Maple Desk We recently had a client from Memphis, Tennessee contact us about designing and building a Maple table. The client saw the original table in an Apple store, being used as a display table, but he wanted to use the same design and turn it into a desk. The desk is downright massive! [...]
Saturday, February 6, 2010
8:43 AM
Solid Cherry Dining, Kitchen, Coffee, and End Tables After the glue had dried overnight,we unclamped the tables, preformed one last final sanding to remove any nicks and dings acquired during the previous stage, and headed off to the finishing room. The finishing process for these tables was pretty much the same as most of our [...]
Saturday, January 23, 2010
6:51 PM
Thank you for your quality work, commitment to schedule, and fair price. You exceeded all expectations – the tables came out more beautiful than we could have ever imagined. We are absolutely thrilled with our tables! Please don’t hesitate to use us as a reference. I can’t wait to share you with my clients. Alicia [...]
Wednesday, January 20, 2010
8:48 AM
Solid Cherry Dining, Kitchen, Coffee, and End Tables After we had routed the mortises for the splines in the underside of the four table tops, we turned our attention to the three splines and nine legs. Each spline received a mortise of the same length as the one in the table top and a mortise [...]
Sunday, January 17, 2010
9:32 PM
Solid Cherry Dining, Kitchen, Coffee, and End Tables We just finished up a suite of tables for a client that were very modern in design, yet were still elegant, warm, and inviting. Each table consisted of a solid 1.5″ thick Cherry top, two solid 1.5″ thick Cherry legs, and one solid 1.5″ thick Cherry stringer. [...]
Sunday, January 17, 2010
8:00 AM
Painted and Glazed Curved Dresser with a Stained Alder Top With the carcass built and the curved sides completed, it was time for us to turn our attention to the two layers of trim work on the top and the bottom. We decided to make the trim work a frame that followed the outside perimeter [...]
Tuesday, January 12, 2010
8:38 AM
Painted and Glazed Curved Dresser with a Stained Alder Top We have been commissioned, by the same people we built the large office unit for, to build a dresser matching the picture above. There are several reasons the client decided to go custom with the dresser: 1. They wanted the finish on the dresser to [...]
Tuesday, January 5, 2010
11:48 AM
Office Unit: Painted and Glazed Body with Stained Alder Surfaces Each main vertical column consists of two parts; a 3″ post, and a turned post cap. Each of the columns are going to be mounted on the front of the cabinet and wrap around the side, which meant, rather than cutting each one in half, [...]
Wednesday, December 30, 2009
7:46 AM
Office Unit: Painted and Glazed Body with Stained Alder Surfaces With all the main cabinets of the office unit built and assembled, it was time to focus on the remaining smaller details left to complete before the sanding and finishing process could begin. One of those details was the raised panel that would connect the [...]